2
2.2 Screen Content
36 Power Meter SICAM P 7KG7750/55, Manual
E50417-B1076-C340-A6, Edition 09.2013
2.2.1.4 3 Min-Max Values
• Up to three measured quantities from the measured quantities tables (except energy and
metered values) can be monitored here.
• The minimum, average and maximum values since recording was last initiated are displayed
for a specific measured quantity. The values remain valid in case of a power failure.
• Recording is initiated (date and time):
• when the device is switched on or
• via "Reset" of the Min-Max values at the programming level.
• If no date/time is set, the duration of the recording is indicated in hours and minutes. If the
time is set, the date and time of recording initiation are indicated.
29.08 Min-Max 12:30
230.11
UL1 233.53 V
228.59
UL2 231.47 V
227.33
UL3 233.48 V
2/10AP
<> Bd/Prm
To Next Page
Loading...
