4
4.1 Operating Notes
54 Power Meter SICAM P 7KG7750/55, Manual
E50417-B1076-C340-A6, Edition 09.2013
4.1 Operating Notes
This chapter describes all of the setting options of the SICAM P that are made via the front but-
tons.
The Main Menu (programming level 2, see chapter 4.3) can be accessed :
• from the measured values screens, the min-max values screens or the screen U, I, cos φ via
the ENTER button,
• from the data logger: use the arrow buttons to select the Date/Time screen and press the
ENTER button.
4.1.1 Button Functions
The following functions are performed via the buttons:
• Moving the cursor to the entry line,
• Scrolling through selection lists when entering settings,
• Selecting numbers when entering numerical values.
If the buttons are held down, the scrolling continues automatically. The buttons generally cycle
between cursor, parameters or numbers.
The selected line, setting, or number is confirmed by pressing the ENTER button.
4.1.2 Windows Structure
*no. screens: 10
*repeat ratio: 0Sec
*illumination: 2Min
*contrast: 5
>screen structure
<ok
<cancel
Selecting * and pressing ENTER moves the
cursor directly to the data entry field on the
same line.
Selecting > screen structure and pressing
ENTER opens a new window for additional
data entry.
Selecting < OK and pressing ENTER con-
firms the settings and returns the user to the
previous level.
Selecting < Cancel and pressing ENTER
cancels the setting changes just made and
returns the user to the previous level.
To Next Page
Loading...
