Siemens SICAM P 7KG7750 - Date; Time; Log

4
4.3 Main Menu
59Power Meter SICAM P 7KG7750/55, Manual
E50417-B1076-C340-A6, Edition 09.2013
4.3.5 Date / Time
SICAM P requires time information for the following functions:
• Oscilloscope
• Log entries
• Measured value memory
One binary input (optional) may be used for time synchronization via minute impulse.
The data for summer/winter time and the binary input can only be set via the PC software SICAM
P parameterization (refer to chapter 5).
4.3.6 Log
The screen Log displays date and time of the most recent status changes.
*date: 01.02.2001
*time: 10:17:57 am
*12/24h: 12
CEST: 00.00 to 00.00
binary input:BE2
<ok
<cancel
failure dd.mm.yy
hh:mm:ss
power on
.
.
: :
settings
.
.
: :
reset limit
.
.
: :
reset average
.
.
: :
reset power
.
.
: :
reset osc.
.
.
: :
set clock
.
.
: :
reset binary
.
.
: :