Siemens SICAM P 7KG7750 - Basic Settings

4
4.4 Basic Settings
60 Power Meter SICAM P 7KG7750/55, Manual
E50417-B1076-C340-A6, Edition 09.2013
4.4 Basic Settings
Here you can make the most important settings directly on the device.
4.4.1 Settings Overview
Settings Overview is where the most important settings associated with the device are displayed.
>settings overview
>input connections
>output contacts
>interface
>change code
>calibration
>additional settings
<ok
calc. mode:standard
4 wire unbalanced
current range: 1.2A
voltage range: 480V
rel 1: limit value1
rel 2: limit value2
bus adr.:111
<cancel