4
4.4 Basic Settings
69Power Meter SICAM P 7KG7750/55, Manual
E50417-B1076-C340-A6, Edition 09.2013
4.4.5 Changing the Password
4.4.5.1 Password of Code 1
off: No function
on: Active if code 2 is active
Secured functions:
Parameterization the screens
Reset
Language / Designation
4.4.5.2 Password of Code 2
off: No function (code 1 is also deactivated )
on: Code activated
Secured functions:
Basic settings
Notes
• A password always consists of a 6-digit number.
• If you have forgotten the password, the device can also be activated by using the master
password. Please contact our hotline for the master password.
• Password 1 is only active if password 2 is also activated.
• If both password 1 and password 2 are activated, password 2 can be used to access all pro-
tected functions of password 1.
• If an identical password is chosen for password 1 and password 2, all functions of password
1 and password 2 can be activated by means of a single password.
• In Level 1, a lock displayed on the status bar indicates whether the status of the device is
password protected (lock closed) or unprotected (lock open).
• After a password has been programmed, a time of 1 minute elapses before it is activated in
level 1 (the activation can be detected when the lock closes on the status bar).
*code1: 000000
* off
*code2: 000000
* off
<ok
<cancel
To Next Page
Loading...
