4
4.4 Basic Settings
70 Power Meter SICAM P 7KG7750/55, Manual
E50417-B1076-C340-A6, Edition 09.2013
• If the protected functions are called in the menu, a window for entering the password
appears.
• If a protected setting is activated by means of a password, all other settings associated with
this password are activated as well. A reactivation is required after a time of 1 minute has
elapsed in level 1.
4.4.6 Calibration
See chapter 6 "Calibration".
4.4.7 Additional Settings
Counter 1 to 4
Counters 1 to 4 can be displayed in the screens. Limit value groups can be assigned to these
counters. If a counter is selected, another window is opened for defining the limit value group
(see outputs).
>counter1-limitvalue1
>counter2-limitvalue2
>counter3-limitvalue3
>counter4-limitvalue4
>further settings
<ok
<cancel
Note
Limit value groups can also be parameterized under Outputs - Limit value group (level 4, see
chapter 4.2)!
To Next Page
Loading...
