Siemens SICAM P 7KG7750 - Reset Memory; Parameterization Screens

4
4.7 Reset Memory
75Power Meter SICAM P 7KG7750/55, Manual
E50417-B1076-C340-A6, Edition 09.2013
4.7 Reset Memory
The following records are deleted in the memory and restarted in the event of a reset:
• Power values
• Mean values
• Alarm log: states of the limit value groups
• Binary log: states of the binary states
• Oscilloscope
4.8 Parameterization Screens
The contents and display mode of the various screens are established in this window.
Number of Screens
1 to 20: The number of screens that can be selected in level 2 via the buttons .
Screen interval (repeat ratio)
0 s to 60 s
0 s: fixed screens (only selection via buttons possible)
1 s to 60 s: scrolls automatically to the next screen after 1 s to 60 s
*reset power values:Y
*reset mean values: N
*reset alarm log: Y
*reset binary log: N
*reset oscilloscope:N
<ok
<cancel
*no. screens: 4
*repeat ratio: 0Sec
*illumination: 99Min
*contrast: 4
>screen structure
<ok
<cancel