4
4.9 I/O Modules
77Power Meter SICAM P 7KG7750/55, Manual
E50417-B1076-C340-A6, Edition 09.2013
4.9 I/O Modules
This screen displays the optional I/O modules together with their current state. For devices with-
out I/O modules the table remains empty.
4.10 Memory Management
You can partition the main memory of 1 MByte as required for the recording of mean values,
outputs, limit violations, binary state changes and oscilloscope records.
The total of the percentages entered must reach but not exceed 100%.
Notes
• For power recording, the recording time will be calculated from the number of channels to be
recorded and the period time.
• For mean values and power recording settings, you have to use the PC software SICAM P
Parameterization (ordering number see chapter 1.3).
module state
E analog- E = 0.0 mA
input E = 0.0 mA
>ok
memory management
*average values:20%
*power values: 20%
*oscilloscope: 20%
*limit values: 20%
*binary log: 20%
<ok
<cancel
To Next Page
Loading...
