Siemens SICAM P 7KG7750 - Data Logger

4
4.11 Data Logger
78 Power Meter SICAM P 7KG7750/55, Manual
E50417-B1076-C340-A6, Edition 09.2013
4.11 Data Logger
The group Data logger displays the following screens:
• Date and time
• Limit value group
• Binary states
To work with the group Data logger proceed as follows:
• In the Main menu, select Screens and press two times ENTER.
• Use the buttons to access the group Data logger.
• To leave the Data logger, go back to the screen Date and Time and press ENTER to return
to the Main menu.
4.11.1 Data Logger Date and Time
This screen shows the current time of the SICAM P (to set the values refer chapter 4.3.5).
4.11.2 Data Logger Limit Violation Group
This screen displays all limit violations ordered by time. You have to read the lines from bottom
to top.
Status line
09.03.2005
15 : 34 : 12
limit time reason
1 10.03.05
08:19:15
ULN1 10.03.05 210.2V
08:52:26
1 10.03.05
08:53:15
2/10AP
<> Bd/Prm