Siemens SICAM P 7KG7750 - Contents

5
5.6 Screens Setting on SICAM P 7KG7750
90 Power Meter SICAM P 7KG7750/55, Manual
E50417-B1076-C340-A6, Edition 09.2013
5.6.2 Contents
Here you define the contents displayed in the individual screens.
To do this, select in field Screen contents the screen No. of the screen you wish to configure
and assign it a screen type in the Content field. Screen types are predefined display formats for
your measured values on the SICAM P display.
You can choose between the screen types:
• 3 Measured values digital
• 6 Measured values digital
• Min-Max values
• U, I, cos φ
For each screen type, further selection options are displayed.
• If you select 3 digital measured values, 6 digital measured values or Min - Max - values,
the options are the measured values to be displayed and the measurement point.
• If you select U, I, cos phi no further settings are require in the basic version.