Siemens SICAM P 7KG7755 - Page 11

Firmware Versions
11
Power Meter, IEC 60870-5-103, Manual
E50417-B1076-C375-A4, Release 11.2012
Identification of the
firmware version
The current firmware version of your SICAM P 7KG7750/55 can be identified as fol-
lows:
• Read the device identification using the software “SICAM P Parameterization” as
described as preparation for a firmware update in the Application Description “Firm-
ware Update” (refer to page 3 for the order number of this document), e.g.:
• Devices with integrated display (7KG7750):
− the firmware version is shown at the display after device start-up for 15 seconds,
e.g.:
− the menu “>settings” - “>about SICAM” can be selected which shows basic de-
vice data, e.g.:
Power Meter
SICAM-P
SICAM 7KG7750
Version:04.00.06
order number: 7KG7750
BF nr.:BF0608099392
version :04.00.06
bus-address:1
calibrated:28.01.2008
module:A
<ok