Siemens SICAM P 7KG7755 - Standard Asdus in Monitoring Direction

To Next Page

To Previous Page

Parameters and Properties

Power Meter, IEC 60870-5-103, Manual

E50417-B1076-C375-A4, Release 11.2012

2.2.2 Standard ASDUs in Monitoring Direction

Table 2-2 Standard ASDUs in monitoring direction

# Designation

Supported by

SICAM P

7KG7750/55?

Remark

ASDU 1 Time-tagged message yes

All available events and binary informa-

tion with time stamp. Also the information

from modules in additional module slot.

ASDU 2 Time-tagged message with relative time no -

ASDU 3 Measurands I no -

ASDU 4 Time-tagged measurands with relative time no -

ASDU 5 Identification yes

Function type: 130

Manufacturer (eight ASCII characters):

„SIEMENS“

SW identification (four ASCII characters):

e.g. „0400“ = Version V04.00

ASDU 6 Time synchronization yes -

ASDU 8 General interrogation termination yes -

ASDU 9 Measurands II yes

refer to chapter 3.1.2,

“Measured Value Telegrams”

ASDU 10 Generic data yes see chapter 3.1.2.10

ASDU 11 Generic identification no -

ASDU 23 List of disturbance data no -

ASDU 26 Ready for transmission of disturbance data no -

ASDU 27 Ready for transmission of channel no -

ASDU 28 Ready for transmission of tags no -

ASDU 29 Transmission of tags no -

ASDU 30 Transmission of disturbance values no -

ASDU 31 End of transmission no -

Related product manuals