Disclaimer of Liability
We have checked the contents of this document and every effort
has been made to ensure that the descriptions of both hardware
and software are as accurate as possible. However, since deviati-
ons cannot be ruled out entirely, we do not accept liability for com-
plete conformity or for any errors or omissions.
The information in this manual is checked periodically, and neces-
sary corrections will be included in future editions. We are grateful
for any improvements that you care to suggest.
Subject to technical alterations.
Document version V01.11.02
Release 11.2012
Copyright
Copyright © Siemens AG 2012
This document shall not be transmitted or reproduced, nor shall its
contents be exploited or disclosed to third parties without prior
written consent from Siemens. Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of
a utility model or design, are reserved.
Registered Trademarks
SIPROTEC
®
, DIGSI
®
, OSCOP
®
and SICAM
®
are registered
trademarks of SIEMENS AG.
Other designations in this manual might be trademarks whose use
by third parties for their own purposes would infringe the rights of
the owner.
To Next Page
Loading...
