Operation and Display
4.3 Key Definition
SICAM P35 P36, 3-phase Multi-Function Power Meter, User Manual
E50417-H8940-C562-4, Release Date 06.2018
23
Examples for Flip-With-Key Operation
Example 1:
This screen shows voltage items.
At cyclic display mode, press "▲" or "▼" to enter key display
mode. When area A is selected, press "▲" or "▼" again to
switch to voltage items.
In the figure, L1=220.0 V, L2=220.1 V, L3=220.5 V and 3-
phase average voltage=220.2 V.
"RS1" shows there is one RS485 port and flickering symbol
means communication in progress. " " means the meter
runs in first quartile.
Example 2:
This screen shows maximum value display items of current
line voltage.
At cyclic display mode, press "▲" or "▼" to enter key display
mode. When area A is selected, press "▲" or "▼" again to
switch to voltage items and press " " to enter maximum
value display.
In the figure: L1=380.0 V, L2=380.1 V, L3=380.5 V, and
maximum 3-phase average line voltage=380.2 V. You can
press "▲" or "▼" to switch to minimum line voltage display.
Press " " to return to previous display.
Example 3:
This screen shows current items.
At cyclic display mode, press "▲" or "▼" to enter key display
mode. When area A is selected, press "▲" or "▼" to switch to
phase current display.
In the figure, L1=1.000 A, L2=1.001 A, L3=1.002 A and 3-
phase average current=1.001 A.
Example 4:
This screen shows zero sequence current items.
At cyclic display mode, press "▲" or "▼" to enter key display
mode. When area A is selected, press "▲" or "▼" to enter
zero sequence current display mode.
In the figure, L1=0.940 A, L2=1.003 A, L3=1.006 A and zero
sequence current=0.079 A.
To Next Page
Loading...
