Operation and Display
4.3 Key Definition
SICAM P35 P36, 3-phase Multi-Function Power Meter, User Manual
E50417-H8940-C562-4, Release Date 06.2018
24
Example 5:
This screen shows current active power items.
At cyclic display mode, press "▲" or "▼" to enter key display
mode. When area A is selected, press "▲" or "▼" to enter
active power items.
In the figure, L1=1.020 kW, L2=1.061 kW, L3=1.042 kW and
total active power=3.123 kW.
Example 6:
This screen shows current reactive power items.
At cyclic display mode, press "▲" or "▼" to enter key display
mode. When area A is selected, press "▲" or "▼" to enter re-
active power items.
In the figure, L1=0.320 kvar, L2=0.351 kvar, L3=0.322 kvar
and total reactive power=0.993 kvar.
Example 7:
This screen shows current apparent power items.
At cyclic display mode, press "▲" or "▼" to enter key display
mode. When area A is selected, press "▲" or "▼" to enter ap-
parent power items.
In the figure, L1=1.210 kVA, L2=1.168 kVA, L3=1.174 kVA and
total apparent power=3.552 kVA.
Example 8:
This screen shows current power factor items.
At cyclic display mode, press "▲" or "▼" to enter key display
mode. When area A is selected, press "▲" or "▼" to enter
power factor items.
In the figure, L1=1.000, L2=0.999, L3=1.000 and total power
factor=1.000.
Example 9:
This screen shows phase angle items.
At cyclic display mode, press "▲" or "▼" to enter key display
mode. When area A is selected, press "▲" or "▼" to enter
phase angle items.
In the figure, L1=30.0°, L2=30.2°, L3=31.0°.
To Next Page
Loading...
