Operation and Display
4.3 Key Definition
SICAM P38 P39, 3-phase Power Meter with Multi-Tariff function, User Manual
E50417-H8940-C564-4, Release Date 06.2018
28
Examples for Flip-With-Key Operation
Example 1:
This screen shows A display area (phase voltage) and B
display area (electric energy at import active tariff on previous
settlement day).
At cyclic display mode, press "▲" or "▼" to enter key display
mode. When area A is selected, press "▲" or "▼" again to
switch to voltage items. Press “ ” to switch to area B. Press
"▲" or "▼" to switch to current import active total energy dis-
play. Press “ ” to enter second level display. Press "▲" or
"▼" to switch to import active total energy on previous settle-
ment day. Press “ ” again to enter third level display. Press
"▲" or "▼" to view import active energy at each tariff on pre-
vious settlement day. Press “ ” to return to previous dis-
play.
"RS1" and “RS2” show there are two RS485 ports and flicker-
ing symbol means communication in progress. "T3" on upper
left corner means current operating tariff and " " means the
meter runs in first quartile.
Example 2:
This screen shows A display area (upper limit of current line
voltage) and B display area (current total active energy).
At cyclic display mode, press "▲" or "▼" to enter key display
mode. When area A is selected, press "▲" or "▼" to switch to
line voltage option and press " " to enter upper limit display.
You can also press "▲" or "▼" to view other extreme values.
Press " " to return to previous display. Press " " again
to switch to area B. Press "▲" or "▼" to switch to current total
active energy display. Press " " to enter second level dis-
play. Press "▲" or "▼" to view total active energy on previous
3 settlement days. Press " " again to enter third level dis-
play. Press "▲" or "▼" to view import active energy at each
tariff on previous settlement day. Press " " to return to pre-
vious display.
Example 3:
This screen shows A display area (phase current) and B
display area (current phase A total export reactive energy).
At cyclic display mode, press "▲" or "▼" to enter key display
mode. When area A is selected, press "▲" or "▼" again to
switch to current option.
In the figure, L1=1.000 A, L2=1.001 A, L3=1.002 A and 3-
phase average current=1.001 A. Press " " to switch to area
B. Press "▲" or "▼" to switch to current phase A total export
rea
ctive
energy display. Press " " to enter second level dis-
play. Press "▲" or "▼" to view phase A total export reactive
energy from previous 1 settlement day to 3 settlement days.
Press " " to return to previous display.
To Next Page
Loading...
