Siemens SICAM P38 - Page 29

Operation and Display
4.3 Key Definition
SICAM P38 P39, 3-phase Power Meter with Multi-Tariff function, User Manual
E50417-H8940-C564-4, Release Date 06.2018
29
Example 4:
This screen shows A display area (current active power) and
B display area (total export reactive energy on previous settle-
ment day).
At cyclic display mode, press "▲" or "▼" to enter key display
mode. When area A is selected, press "▲" or "▼" to enter
active power items.
In the figure of A, L1=1.020 kW, L2=1.061 kW, L3=1.042 kW
and total active power=3.123 kW. Press " " to switch to
area B. Press "▲" or "▼" to switch to total current export re-
active energy display. Then, press " " to enter total export
reactive energy on previous settlement day. You can press
"▲" or "▼" to view total export reactive energy from current to
previous 3 settlement days. Press " " to view export reac-
tive energy at each tariff. Press " " to return to previous dis-
play.
Example 5:
This screen shows A display area (current apparent power)
and B display area (total active energy on previous 2 settle-
ment days at phase B).
At cyclic display mode, press "▲" or "▼" to enter key display
mode. When area A is selected, press "▲" or "▼" to enter ap-
parent power items.
In the figure of A, L1=1.210 kW, L2=1.168 kVA, L3=1.174 kVA
and total apparent power=3.552 kVA.Press " " to switch to
area B. Press "▲" or "▼" to switch to total current active
energy of phase B. Press " " to enter total active energy of
phase B on previous settlement day. You can press "▲" or "▼"
to view total active energy from previous 1 to 3 settlement
days. Press " " to return to previous display.
Example 6:
This screen shows A display area (current power factor) and
B display area (current net reactive energy of phase C).
At cyclic display mode, press "▲" or "▼" to enter key display
mode. When area A is selected, press "▲" or "▼" to switch to
power factor items.
In the figure, L1=1.000, L2=0.999, L3=1.000 and total power
factor=1.000. Press " " to switch to area B. Press "▲" or
"▼" to switch to current phase C net reactive energy. Press
" " to enter second level display. Press "▲" or "▼" to view
phase C net reactive energy from previous 1 settlement day to
3 settlement days. Press " " to return to previous display.