7 Operation at Use of a PC
7.2 Start and Design of the User Interface
101SICAM P850/P855, 7KG85xx, Device Manual
E50417-H1040-C482-A6, Edition 10.2018
✧ In the Internet options dialog, open the Security tab.
Figure 7-2 Enabling JavaScript
✧ In the window of the Security tab, select the Internet icon.
✧ On the Security tab, scroll to Medium by moving the scroll bar with your mouse. Alternatively, if there is
no scroll bar, click Default Level and set the scroll bar that appears to Medium.
✧ Click Apply.
✧ Click OK.
7.2.3 Changing the Buffer Mechanism
The operation of the user interface requires the SIGRAPlugin.
Change the buffer mechanism as follows:
✧ Start Microsoft Internet Explorer.
✧ Select the Tools menu in the menu bar of Microsoft Internet Explorer.
✧ Select Internet options from the Tools menu.
✧ In the Internet options dialog, open the General tab.
✧ In the window of the General tab, select the Settings icon.
NOTE
If the IE 10.0 or a higher version is used, you may have to change the relevant IE settings as described in the
chapter 7.2.3, chapter 7.2.4 and chapter 7.2.5.
To Next Page
Loading...
