7 Operation at Use of a PC
7.3 Configuration of the Device
162 SICAM P850/P855, 7KG85xx, Device Manual
E50417-H1040-C482-A6, Edition 10.2018
To change the Ethernet communication settings, proceed as follows:
✧ In the navigation window, select the Administrative menu and click Communication Ethernet.
The Communication Ethernet input/output window with Protocol Modbus TCP opens.
Figure 7-49 Configure Tab, Communication Ethernet via Modbus TCP Input/Output Window
✧ Enter the desired values in the fields and select the parameters in the list boxes and in the option field as
described in Table 7-20.
Download SNMP Device MIB File
✧ Select yes in the Enable SNMP option (see Figure 7-49).
✧ In the Communication Ethernet input/output window, click Download SNMP device MIB file.
NOTE
The SNMP protocol is implemented in SICAM P850/P855 in order to be able to retrieve manufacturer-specific
information.
To retrieve information via SNMP, a MIB browser and the SICAM P.mib file are required. The MIB browser
allows the displaying of SNMP information objects and their content.
To Next Page
Loading...
