Siemens Sicam P850 7KG85 Series - Page 178

7 Operation at Use of a PC
7.4 Value View and Evaluation
178 SICAM P850/P855, 7KG85xx, Device Manual
E50417-H1040-C482-A6, Edition 10.2018
7.4.2.1 Events (Only SICAM P855)
Default Settings and Setting Options
To display the values on the screen, proceed as follows:
✧ In the navigation window, select the Evaluation and Data Management menu and click Events.
The Events input/output window opens.
Figure 7-58 Value View Tab and Evaluation, Events Input/Output Window, Supply Voltage
✧ Select the desired Event record type in the list box according to Table 7-25 and specify the Start time
and End time using the calendar function.
✧ Select from the Measurement output list box whether the measured values are to be output as a Table
or a CSV file is to be created.
Table 7-25 Value View and Evaluation - Events
Parameter Default Setting Setting Options
Event record type Supply Voltage Supply Voltage
Frequency
Unbalance
Start time Current date/time Any with calendar function
Time format: depends on date/time format config.
End Time Current date/time Any with calendar function
Time format: depends on date/time format config.
Measurement output Table Table
CSV