7 Operation at Use of a PC
7.4 Value View and Evaluation
179SICAM P850/P855, 7KG85xx, Device Manual
E50417-H1040-C482-A6, Edition 10.2018
Measurement Output as Table
✧ Click Display.
The determined results are displayed in a table. In multi-paged tables you can navigate forward and back
in the pages using the >> and << buttons. If you want to view a certain page, enter the page at the bottom
and click on show.
The results can be displayed graphically using COMTRADE viewer (link in Diagram column).
Measurement Output as CSV File
✧ Click Download.
The File Download dialog opens.
Figure 7-59 Dialog File Download
File Download -> Save CSV File
✧ Click Save.
The Save As dialog opens.
✧ Select the file path in the Save in: list box.
✧ Use the file name suggested in the File name: list box or enter a new file name with the file extension .csv.
NOTE
When an event has occurred, with this setting the recordings are marked in red on the record list under Find
result list. And a message is showed under the list when event happen. For information about the flagging con-
cept, please refer to Functioning of the Measuring System according to IEC 61000-4-30.
NOTE
The length of file names must not exceed 8 characters. Use only characters according to NOTE in Open Con-
figuration from File.
To Next Page
Loading...
