Siemens Sicam P850 7KG85 Series - Page 225

8 Operation at Use of the Display
8.4 Parameterization
225SICAM P850/P855, 7KG85xx, Device Manual
E50417-H1040-C482-A6, Edition 10.2018
Submenu Display Number 32.3: Basic Parameters
Figure 8-20 Submenu Display Number 32.3, Basic Parameters
32.3
Basic
parameters
34.0
Voltage inputs
ENTER
EDIT
34.1
Current inputs


ENTER
34.0
+
-
ENTER
34.1
Rated value
Use CTs?
34.2
Zero point sup .
EDITENTER
34.2
Zero point sup .




EDIT
Select. parameters acc .
to following table
OKESC
X oder Y
X
Y

34.0
Use PTs?
34.0
Rated value
Connection types
NOTE
The selection of the transformers only becomes active after a delay of 5 s.
Table 8-3 Basic Parameter Settings
Parameter Default Setting Setting Range
Voltage Inputs
Connection type The connection type is indicated on the display. However, it can be set via
the User interface only.
Rated value The rated value is indicated on the display. However, it can be set via the
User interface only.
Use PTs? No
(no checkmark)
Yes (checkmark)
No (no checkmark)