11 Maintenance, Storage, Transport
11.1 7KG85xxMaintenance
254 SICAM P850/P855, 7KG85xx, Device Manual
E50417-H1040-C482-A6, Edition 10.2018
11.1 7KG85xxMaintenance
Except for a battery replacement, the SICAM P850/P855 is maintenance-free.
Wipe the device using a clean, dry and soft cloth if necessary. Do not use solvents.
The Product Information enclosed with the device describes how to replace the battery.
11.2 Storage
Store the device in a dry and clean location. Store the device within a temperature range from -40 °C to +70 °C
(-40 °F to +158 °F).
The relative humidity must not lead to condensation or ice formation.
To avoid premature aging of the electrolytic capacitors, store the device within the recommended temperature
range of +10 °C to +35 °C (+50 °F to +95 °F).
Siemens furthermore recommends connecting the device to supply voltage once a year for 1 to 2 days in order
to form the inserted electrolytic capacitors. This procedure should also be carried out before operating the de-
vice.
The Lithium batteries used in Siemens devices are subject to Special Provision 188 of the UN Recommenda-
tions on the Transport of Dangerous Goods Model Regulations and Special Provision A45 of the IATA Danger-
ous Goods Regulation and the ICAO Technical Instructions. This is only valid for the original battery or original
spare batteries.
11.3 Transport
For reshipment, Siemens recommends using the original transport packaging of the devices. If you use another
packaging, make sure that the packaging meets the requirements concerning the stress during transport ac-
cording to the requirements of standard ISO 2248. The storage packing of the individual devices is not ade-
quate for transport purposes.
The Lithium-batteries in our equipment are subject to Special Provision 188 of the UN Recommendations on
the Transport of Dangerous Goods Model Regulations and Special Provision A45 of the IATA Dangerous
Goods Regulation and the ICAO Technical Instructions. This is only valid for the original battery or original
spare batteries.
NOTE
In this context, pay attention to the commissioning notes in chapter 5.7.
To Next Page
Loading...
