Siemens Sicam P850 7KG85 Series - Leds

15 Operating Parameters
15.1 Process Connections
289SICAM P850/P855, 7KG85xx, Device Manual
E50417-H1040-C482-A6, Edition 10.2018
15.1.3 LEDs
LED Default Setting Setting Range
RUN Device ready Not settable
ERROR -none- -none-
Battery Failure
Ethernet Link Error
Time Synchronization Error
Primary NTP Server Error
Secondary NTP Server Error
SD Card Error
H1
H2
-none- -none-
Device OK
Battery Failure
Settings Load
Settings Check
Settings Activate
Modbus TCP OK
Ethernet Link Error
Modbus Serial OK
Time Synchronization Error
Primary NTP Server Error
Secondary NTP Server Error
Daylight Saving Time
Default IP Address
IEC 60870-5-103 OK
Limit Violation y (y = 1 to 16)
Indication 1 from Remote
Indication 2 from Remote
Rotating Field Clockwise
Group Indication x (x = 1 to 4)
IEC 61850 Communication OK
SD Card Error
Voltage Event Available
Frequency Event Available
Volt. Unbalance Event Available
Indication inverted no no
yes