15 Operating Parameters
15.2 Automation Functions
291SICAM P850/P855, 7KG85xx, Device Manual
E50417-H1040-C482-A6, Edition 10.2018
15.2.2 Group Indications 1-4
Parameter Default Setting Setting Range
Source -none- -none-
Device OK
Battery Failure
Settings Load
Settings Check
Settings Activate
Modbus TCP OK
Ethernet Link Error
Modbus Serial OK
Time Synchronization Error
Primary NTP Server Error
Secondary NTP Server Error
Daylight Saving Time
Default IP Address
IEC 60870-5-103 OK
Limit Violation y (y = 1 to 16)
Indication 1 from Remote
Indication 2 from Remote
Rotation Field Clockwise
Group Indication x (x = 1 to 4)
IEC 61850 Communication OK
SD Card Error
Voltage Event Available
Frequency Event Available
Volt. Unbalance Event Available
Source inverted no no
yes
Logic operation NONE NONE
OR
AND
Group indication name Group Indication x Any
To Next Page
Loading...
