Siemens Sicam P850 7KG85 Series - User Defined Screen

15 Operating Parameters
15.3 HMI
293SICAM P850/P855, 7KG85xx, Device Manual
E50417-H1040-C482-A6, Edition 10.2018
15.3.2 User Defined Screen
Parameter Default Setting Setting Range
Screen type -none- -none-
2 measured values, numerical
4 measured values, numerical
2 measured values, graphical + numerical
3 measured values, graphical + numerical
Screen name USER_SCREEN_x
(x = 1 to 4)
any
2 measured values, numerical
Display 1, numerical
Display 2, numerical
-none- -none-
Va, Vb, Vc
Vab, Vbc, Vca
Ia, Ib, Ic
VN, Vavg
IN, Iavg
Pa, Pb, Pc, P
Qa, Qb, Qc, Q
Sa, Sb, Sc, S
cos  (a), cos  (b), cos  (c), cos 
PFa, PFb, PFc, PF
UIa, UIb, UIc, UI
f
Vunbal
Iunbal
THDS Va, THDS Vb, THDS Vc
THDS Ia, THDS Ib, THDS Ic
ab V, ca V
ab I, ca I
Q1a, Q1b, Q1c; Q1
Pinst (a-n), Pinst (b-n), Pinst (c-n)
Pst (a-n), Pst (b-n),Pst (c-n)
Plt (a-n), Plt (b-n), Plt (c-n)
Pinst (a-b), Pinst (b-c), Pinst (c-a)
Pst (a-b), Pst (b-c), Pst (c-a)
Plt (a-b), Plt (b-c), Plt (c-a)
WPa_sup, WPb_sup, WPc_sup, WP_sup
WPa_dmd, WPb_dmd, WPc_dmd,
WP_dmd
WQa_ind, WQb_ind, WQc_ind, WQ_ind
WQa_cap, WQb_cap, WQc_cap,
WQ_cap
WSa, WSb, WSc, WS
(Setting ranges pending from network type
and device type)
4 measured values, numerical
Display 1, numerical
Display 2, numerical
Display 3, numerical
Display 4, numerical
-none-
2 measured values, graphical
and numerical
Display 1, graph./num.
Display 2, graph./num.
-none-
3 measured values, graphical
and numerical
Display 1, graph./num.
Display 2, graph./num.
Display 3, graph./num.
-none-
Display x, graph./num.
(x = 1 to 3)
Min value
Max value
1.0
10.0
(unit according to
measured value)
The minimum and maximum value is
defined by the selected parameters (see
chapter 7.3.3.1.1).