Siemens Sicam P855 7KG85 Series - Hmi

7 Operation at Use of a PC
7.3 Configuration of the Device
137SICAM P850/P855, 7KG85xx, Device Manual
E50417-H1040-C482-A6, Edition 10.2018
7.3.4 HMI
7.3.4.1 Display Settings
Default Settings and Setting Ranges
To change the properties of the display, proceed as follows:
✧ In the navigation window, select the HMI menu and click LCD Property.
Figure 7-38 Configure Tab, Display Settings Input/Output Window
Table 7-8 Display Settings
Parameter Default Setting Setting Range
Contrast 8 0 to 10
Time until dimmed 10 1 min to 99 min
Refresh time 1000 330 ms to 3000 ms
Inverse display no no
yes
Phase label (L1,L2,L3) (L1,L2,L3)
(a,b,c)
Use password yes no
yes