7 Operation at Use of a PC
7.3 Configuration of the Device
155SICAM P850/P855, 7KG85xx, Device Manual
E50417-H1040-C482-A6, Edition 10.2018
changes and then enable the device configuration as described in section Activating the Set of
Parameters.
7.3.5.6 Recording Parameters and Power Quality Data
Default Settings and Setting Ranges
To change the recording parameter settings, proceed as follows:
NOTE
Power Quality Report (Only SICAM P855) describes the output of the power quality report.
Table 7-18 Reporting Parameters
Parameter Default Setting Setting Range
Start record option Start next 10th minute Start next minute
Start next 10th minute
Start immediately
Start next hour
Start next day
Start time - Display of the start time according to the settings
of the Date/time format, see Device and
Language.
Recording status - not settable
Recorder status display started or recorder
stopped
To Next Page
Loading...
