Siemens Sicam P855 7KG85 Series - Binary Outputs

15 Operating Parameters
15.1 Process Connections
287SICAM P850/P855, 7KG85xx, Device Manual
E50417-H1040-C482-A6, Edition 10.2018
15.1.2 Binary Outputs
Parameter Default Settings Setting Range
Source type Indication Indication
Energy counter
Indication
(only if source type = indication)
-none- -none-
Device OK
Battery Failure
Settings Load
Settings Check
Settings Activate
Modbus TCP OK
Ethernet Link Error
Modbus Serial OK
Time Synchronization Error
Primary NTP Server Error
Secondary NTP Server Error
Daylight Saving Time
Default IP Address
IEC 60870-5-103 OK
Limit Violation y (y = 1 to 16)
Indication 1 from Remote
Indication 2 from Remote
Rotation Field Clockwise
Group Indication x (x = 1 to 4)
IEC 61850 Communication OK
SD Card Error
Voltage Event Available
Frequency Event Available
Volt. Unbalance Event Available
Energy counter
(only if source type = energy coun-
ter)
-none- WPa_sup
WPb_sup
WPc_sup
WP_sup
WPa_dmd
WPb_dmd
WPc_dmd
WP_dmd
WQa_ind
WQb_ind
WQc_ind
WQ_ind
WQa_cap
WQb_cap
WQc_cap
WQ_cap
WSa
WSb
WSc
WS
Source inverted
(only if source type = indication)
no no
yes