Siemens Sicam P855 7KG85 Series - Page 305

15 Operating Parameters
15.5 Administrative
305SICAM P850/P855, 7KG85xx, Device Manual
E50417-H1040-C482-A6, Edition 10.2018
Transmit HVb Mag.(2nd, 4rd,
6th,...,40th)
no no
yes
Transmit HVc Mag.(Fundamental,
3rd, 5th,...,39th)
no no
yes
Transmit HVc Mag.(2nd, 4rd,
6th,...,40th)
no no
yes
Transmit HIa Mag.(Fundamental,
2nd, 3rd,...,21st)
no no
yes
Transmit HIb Mag.(Fundamental,
2nd, 3rd,...,21st)
no no
yes
Transmit HIc Mag.(Fundamental,
2nd, 3rd,...,21st)
no no
yes
Transmit HIa Mag.(22nd, 23rd,
24th,...,40th)
no no
yes
Transmit HIb Mag.(22nd, 23rd,
24th,...,40th)
no no
yes
Transmit HIc Mag.(22nd, 23rd,
24th,...,40th)
no no
yes
Cyclic sending period 50 * 100 ms 30 * 100 ms to 600 * 100 ms
Communication supervision time 600 * 100 ms 0 s = none
100 ms to 6 553 400 ms
Parameter Default Setting Setting Range
NOTE
For the serial communication via IEC 60870-5-103, the parity is permanently set to even.