6 Security
6.2 Account Management
104 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
Setting the HMI Password
Figure 6-8 Configuration Tab, HMI Password
To set the HMI password in the Configure tab, proceed as follows:
✧ In the navigation window, select Administrative and click Account management.
✧ Set the HMI password according to the following table:
Table 6-7 Settings for the HMI Password
Settings Default Settings Setting Ranges
Use HMI password yes no
yes
New password 000000 6 digital numbers (0 to 9)
MAN_SICAM_Q100_US.book Page 104 Wednesday, June 5, 2019 9:31 AM
To Next Page
Loading...
