Siemens SICAM Q100 7KG95 Series - Starting the User Interface During Operation

9 Operation at Use of a PC
9.2 Start and Design of the User Interface
146 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
9.2.7 Starting the User Interface during Operation
Starting the User Interface
To start the user interface, proceed as follows:
✧ Start the Web browser.
✧ Enter the IP address in Microsoft Internet Explorer (for example the default IP address: 192.168.0.55) of
SICAM Q100 and press ENTER.
The user interface opens with the Log on tab.
✧ Enter the User name and Password, and click Log on.
Figure 9-7 Log on via the User Interface
The user interface opens with the Information -> Show device information (Figure 9-8).
MAN_SICAM_Q100_US.book Page 146 Wednesday, June 5, 2019 9:31 AM