9 Operation at Use of a PC
9.3 Configuration of the Device
154 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
9.3.1.1 Get Device Configuration
If you have selected Get device configuration in the Configure tab, you can open and edit either the Get
active configuration or the Get default configuration in the input/output window. Proceed as follows:
Figure 9-15 Configure Tab, Get Device Configuration
Get Active Configuration and Editing
✧ Click Get active configuration.
A copy
of the active set of parameters (= passive set of parameters) of the device is opened for editing.
✧ Check and, if necessary, change the set parameters by opening the desired menus in the navigation
window:
✧ Operational parameters menu according to chapter 9.3.3
✧ HMI settings according to chapter 9.3.4
✧ Recording and reporting according to chapter 9.3.5.3
✧ Administrative menu according to chapter 9.3.7.
✧ Activate the modified configuration as described in chapter 9.3.1.3.
MAN_SICAM_Q100_US.book Page 154 Wednesday, June 5, 2019 9:31 AM
To Next Page
Loading...
