9 Operation at Use of a PC
9.3 Configuration of the Device
160 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
Cancel
To cancel the configuration, proceed as follows:
✧ In the navigation window, select the Finish configuration menu and click Cancel.
Figure 9-22 Configure Tab, Cancel Input/Output Window
✧ Click Cancel in the input/output window.
NOTE
After clicking Cancel, the active set of parameters is copied into the passive set of parameters. This action is
the same as Get device configuration -> Get active configuration described in chapter 9.3.1.1.
After you have clicked Cancel, the parameterization is released and can be run from a different computer if
necessary.
MAN_SICAM_Q100_US.book Page 160 Wednesday, June 5, 2019 9:31 AM
To Next Page
Loading...
