9 Operation at Use of a PC
9.3 Configuration of the Device
186 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
9.3.5.2 Tariffs (TOU)
Default Settings and Setting Ranges
1)
In this case, the protocol Modbus TCP can control tariff 1 to tariff 8. Refer to the System Manual SICAM
Q100, chapter 2.2.7.18 Register 0154: Tariffs (read and write), order number E50417-C1040-C522.
2)
This synchronization source can only control tariff 1 or tariff 2.
3)
The default settings of Tariff 1 Period 1 Active for 2 seasons are checked.
Table 9-11Tariffs (TOU)
Parameter Default Setting Setting Range
Synchronization source Protocol Protocol
1)
Binary input 1
2)
Binary input 2
2)
Calendar
The following parameters are available only when Synchronization source is set to Calendar.
Season 1 Start 01-01 01-01 to 12-31
Season 1 End 06-30 01-01 to 12-31
Season 2 Start 07-01 Not settable
The rest days of the full year
Season 2 End 12-31
Weekend Setting Thursday and Friday Sunday to Saturday, max. 2 days
Season x (x = 1 or 2) Tariff
y (y = 1 to 8) Period 1 Start
00:00 00:00 to 23:45
Season x (x = 1 or 2) Tariff
y (y = 1 to 8) Period 1 End
24:00 00:15 to 24:00
Season x (x = 1 or 2) Tariff
y (y = 1 to 8) Period 2 Start
00:00 00:15 to 23:45
Season x (x = 1 or 2) Tariff
y (y = 1 to 8) Period 2 End
24:00 00:30 to 24:00
Season x (x = 1 or 2) Tariff
y (y = 1 to 8) Period 1 Active
No
3)
Yes
No
Season x (x = 1 or 2) Tariff
y (y = 1 to 8) Period 2 Active
No Yes
No
Season x (x = 1 or 2) Tariff
y (y = 1 to 8) Workday/
Weekend Selection
Every Day Every Day
Workday
Weekend
Coverage Check Pass
Fail (with gap)
Fail (with overlap)
MAN_SICAM_Q100_US.book Page 186 Wednesday, June 5, 2019 9:31 AM
To Next Page
Loading...
