Siemens SICAM Q100 7KG95 Series - Page 224

9 Operation at Use of a PC
9.3 Configuration of the Device
224 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
The OPC UA PubSub (MQTT) Input/Output Window opens.
Figure 9-63 Configure Tab, Protocol OPC UA PubSub (MQTT) Input/Output Window
Default Settings and Setting Ranges of the Protocol OPC UA PubSub (MQTT)
Table 9-25 Protocol OPC UA PubSub (MQTT)
Parameter Default Setting Setting Range
Broker and network
Broker IP address or host name mqtt.eu 1-b.mindsphere.io
Any IP address or host-name string
(maximum 128 characters)
Topic name
1)
c/{ClientID}/o/opcua/
{VersionMS}/u/
{Meas:d|File:d|Meta:m}
Any (maximum 128 characters)
DNS server IP address 0.0.0.0 Any IP address
Data transmission
Harmonics voltage
2)
yes yes
no
Harmonics current
2)
yes yes
no
MAN_SICAM_Q100_US.book Page 224 Wednesday, June 5, 2019 9:31 AM