9 Operation at Use of a PC
9.3 Configuration of the Device
265SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
9.3.7.8.2 View via Syslog Server
If the Syslog function in a Q100 device is activated and the Syslog server is running, you can read the audit
logs from the Syslog server. The audit logs are sent to the configured Syslog server using the UDP protocol
when the logs are recorded in the Q100 device.
You can see the audit logs from the Kiwi Syslog Service Manager, see the following figure.
Figure 9-84 Audit Logs on the Kiwi Syslog Service Manager
The following security messages are listed:
• Date of receiving the security message
• Time of receiving the security message
• Priority of the message, which is defined by the Syslog server
• Hostname of the device which generates the security message
• Message description
MAN_SICAM_Q100_US.book Page 265 Wednesday, June 5, 2019 9:31 AM
To Next Page
Loading...
