9 Operation at Use of a PC
9.4 Value View and Evaluation
266 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
9.4 Value View and Evaluation
9.4.1 Process Connections and Automation Functions
The values for Operational parameters (Process connections and Automation functions) are displayed in
the Value view and Evaluation tab. To display the values on the screen, proceed as follows:
✧ Select the Value view and Evaluation tab on the user interface.
Figure 9-85 Value View and Evaluation Tab
✧ In the navigation window, open the Operational parameters menu, then the Process connections or
Automation functions submenu and click one of the following items:
AC operational values
Harmonics voltage
Harmonics current
Interharmonics voltage
Interharmonics current
AC power and energy
Frozen energy counters: see chapter 9.4.1.2
Flicker
Binary status: see chapter 9.4.1.3
Modbus slave devices: see chapter 9.4.1.4
SICAM subdevices: see chapter 9.4.1.5
Load profile: see chapter 9.4.1.6
Tariff (TOU): see chapter 9.4.1.7
Limits
Group indications
Depending on which operational parameters are selected, the input/output window displays the measured
values with the corresponding unit or indications in a tabular list that is updated every 5 s.Harmonics and
MAN_SICAM_Q100_US.book Page 266 Wednesday, June 5, 2019 9:31 AM
To Next Page
Loading...
