9 Operation at Use of a PC
9.4 Value View and Evaluation
279SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
9.4.2.1 Events
Default Settings and Setting Options
1)
For RVC event, there is no CSV or diagram available.
To display the values on the screen, proceed as follows:
✧ In the navigation window, select the Evaluation and data management menu and click Events.
Figure 9-97 Value View Tab and Evaluation, Events Input/Output Window, Supply Voltage
✧ Select the desired Event record type in the list box according to Table 9-45 and specify the Start time
and End time using the calendar function.
Table 9-45 Value View and Evaluation - Events
Parameter Default Setting Setting Options
Event record type Supply Voltage Voltage event
Frequency event
Voltage-unbalance event
RVC event
1)
Start time Current date/time Any with calendar function
Time format: depends on date/time format config.
End Time Current date/time Any with calendar function
Time format: depends on date/time format config.
Measurement output Table Table
CSV
MAN_SICAM_Q100_US.book Page 279 Wednesday, June 5, 2019 9:31 AM
To Next Page
Loading...
