9 Operation at Use of a PC
9.4 Value View and Evaluation
282 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
9.4.2.2 Records
Default Settings and Setting Options
Table 9-46 Value View and Evaluation - Records
Parameter Default Setting Setting Options
Record type Measurement
recorder
Trend Recorder
Measurement recorder
Measurement Recorder
Start time Current time Any with calendar function
Time format: depends on date/time
format config.
End time no setting, only display
Measurement source Frequency 10 s Frequency 10 s
Voltage
Current
Voltage angle
Current angle
Active power
Reactive power
Apparent power
Active power factor
Power factor
Phase angle
Frequency
Unbalance
THDS voltage
THDS current
Q1
Harmonic voltage magnitude
Harmonic current magnitude
Short-term flicker
Long-term flicker
Measurements f - 10 s The selectable Measurements
depend on the selected Measurement
Source.
Aggregation Type
(The aggregation type is not displayed if
the frequency is 10 s, and flicker)
AVG AVG
MIN (not for harmonics)
MAX
Measurement output Table Table
Diagram
CSV
Trend Recorder
Query method
(only for trend recorder query)
By time By time
By event
MAN_SICAM_Q100_US.book Page 282 Wednesday, June 5, 2019 9:31 AM
To Next Page
Loading...
