9 Operation at Use of a PC
9.4 Value View and Evaluation
283SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
To display the values on the screen, proceed as follows:
✧ In the navigation window, select the Evaluation and data management menu and click Records.
The Records input/output window opens.
Figure 9-99 Value View and Evaluation Tab, Records Input/Output Window, Measurement Recorder
✧ Select the respective recording settings in the list box according to Table 9-46.
By time
Start time
End time
Current time Any with calendar function
Time format: depends on date/time
format config.
no setting, only display (2 h after start)
By event
Event list Selection of a displayed event
Measurement Source Voltage Voltage
Measurements Va Va, Vb, Vc
Vab, Vbc, Vca
Measurement output Table Table
Diagram
CSV
Table 9-46 Value View and Evaluation - Records (cont.)
Parameter Default Setting Setting Options
MAN_SICAM_Q100_US.book Page 283 Wednesday, June 5, 2019 9:31 AM
To Next Page
Loading...
