9 Operation at Use of a PC
9.4 Value View and Evaluation
284 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
✧ Click Display.
The determined results are displayed in a Find result table. In multi-paged tables you can navigate forward
and back in the pages using the >> and << buttons.
9.4.2.3 Mains Signaling Voltage
Default Settings and Setting Options
To display the values on the screen, proceed as follows:
✧ In the navigation window, select the Evaluation and data management menu and click Mains signaling
voltage.
Table 9-47 Mains Signaling Voltage
Parameter Default Setting Setting Options
Start time Current time Any with calendar function
Time format: depends on date/time
format config.
End time No setting, only display
Detection time -none- Detailed information generated as
the list in the corresponding data
format depending on the
parameterized data type and mains
signaling frequency.
Measurement output Table Table
Diagram
MAN_SICAM_Q100_US.book Page 284 Wednesday, June 5, 2019 9:31 AM
To Next Page
Loading...
