9 Operation at Use of a PC
9.4 Value View and Evaluation
285SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
The Mains signaling voltage input/output window opens.
Figure 9-100 Value View and Evaluation Tab, Mains Signaling Voltage Input/Output Window
✧ Select the respective recording settings in the list box according to Table 9-47.
✧ Click Display.
The detailed results are displayed in a Find result table. In multi-paged tables, you can navigate forward and
back in the pages using the >> and << buttons.
NOTE
In the “Detection time” drag list, it is displayed as “-none-” if no mains signaling voltage record is detected dur-
ing the specified time stamp. The item in the drag list is displayed as “xxxx-xx-xx xx:xx:xx:xxx on YYY Hz”.
The “xxxx-xx-xx xx:xx:xx::xxx” is the trigger time of the mains signaling voltage recording in local time. “YYY”
is the related frequency. You can select any item in the drag list to see the detailed data.
MAN_SICAM_Q100_US.book Page 285 Wednesday, June 5, 2019 9:31 AM
To Next Page
Loading...
