9 Operation at Use of a PC
9.4 Value View and Evaluation
286 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
9.4.2.4 Power Quality Report
Default Settings and Setting Options
To display the values on the screen, proceed as follows:
✧ In the navigation window, select the Evaluation and data management menu and click Power quality
report.
The Power quality report input/output window opens.
Figure 9-101 Value View and Evaluation Tab, Power Quality Report Input/Output Window
✧ Enter the Start time and End time using the calendar function.
✧ Click Generate report.
The report is displayed in a separate window and can be printed out or saved.
Table 9-48 Power Quality Report
Parameter Default Setting Setting Options
Start Time Current time Any with calendar function
Time format: depends on date/time format config.
End Time Current time Any with calendar function
Time format: depends on date/time format config.
MAN_SICAM_Q100_US.book Page 286 Wednesday, June 5, 2019 9:31 AM
To Next Page
Loading...
