9 Operation at Use of a PC
9.5 Maintenance
314 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
9.5.4.2 Error Log
To view and clear the Error log (max. 128), proceed as follows:
✧ In the navigation window, select the Message Logs menu and click Error log.
Figure 9-131 Maintenance Tab, Delete Error Log
✧ Click Delete log in the input/output window.
All error messages in the input/output window are deleted without backup. The indication no. 0001
appears in the log list: ***Error Log Cleared***.
NOTE
Error messages are service information that you quote to the service department upon request in case of an
error.
NOTE
If you need the error messages, for example for subsequent analysis, save or print them out as described in
chapter 9.2.7.2.
MAN_SICAM_Q100_US.book Page 314 Wednesday, June 5, 2019 9:31 AM
To Next Page
Loading...
