9 Operation at Use of a PC
9.5 Maintenance
319SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
9.5.6 Diagnosis
9.5.6.1 Diagnosis Modbus TCP
✧ In the navigation window, select the Diagnosis menu and click Modbus TCP.
The Modbus TCP input/output window opens and the Modbus TCP protocol is displayed. For Modbus
TCP the Standard server, the User-port server and the Connection data are analyzed.
Figure 9-134 Maintenance Tab, Diagnosis Modbus TCP Input/Output Window
✧ To clear the counters for Modbus TCP, click Clear counters.
All counters for Modbus TCP are reset to 0.
NOTE
The diagnostics data of Modbus TCP are displayed only if this bus protocol has been selected in the tab
Configure Menu Administrative Element Ethernet communication.
If the protocol has not been selected, the Diagnosis Modbus TCP input/output window displays -none-.
NOTE
For further explanations on Modbus TCP diagnostics, refer to the System Manual SICAM Q100.
MAN_SICAM_Q100_US.book Page 319 Wednesday, June 5, 2019 9:31 AM
To Next Page
Loading...
