9 Operation at Use of a PC
9.5 Maintenance
322 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
9.5.6.4 OPC UA PubSub (MQTT)
✧ In the navigation window, select the Diagnosis menu and click OPC UA PubSub (MQTT).
The OPC UA PubSub (MQTT) input/output window opens. The diagnostic data of OPC UA PubSub
(MQTT) is then analyzed.
Figure 9-137 Maintenance Tab, Diagnosis OPC UA PubSub (MQTT) Input/Output Window
Broker and Network
The Broker and network section shows the following information:
NOTE
The diagnostic data of OPC UA PubSub (MQTT) is displayed only if you have activated OPC UA PubSub
(MQTT) in Configure Administrative Communication Ethernet.
If you have not activated OPC UA PubSub (MQTT), the option OPC UA PubSub (MQTT) is invisible under
Diagnosis in the navigation window.
Table 9-51 Information in the Broker and Network Section
Parameter Information
Broker IP address or host name Configured
Topic name Configured
MAN_SICAM_Q100_US.book Page 322 Wednesday, June 5, 2019 9:31 AM
To Next Page
Loading...
