Siemens SICAM Q100 7KG95 Series - Measured Quantities Submenus

10 Operation at Use of the Display
10.4 Parameterization
344 SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
10.4.2 Measured Quantities Submenus
Submenu Display Number 1 through 11, 20 and 33: Measured Quantities
• Voltage Vph-n, Voltage Vph-ph
• Current I
• Active Power P, React. Power Q, App. Power S, Total Power P, Q, S
• Power factor PF, Tot. Pwr.factor PF tot
• Disp. angles
• Frequency
• Active factor cos j
Figure 10-7 Submenus of the Display Numbers 1 to 11, 20 and 33, Various Measured Quantities
Submenu Display Number 12 and 13: THDS Voltage and THDS Current
Figure 10-8 Submenu Display Number 12 and 13, THDS V and THDS I
Submenu Display Number 14: Phasor Diagram
Figure 10-9 Submenu Display Number 14, Phasor Diagram
NOTE
To return to the main menu from within any submenu, press the F4 Menu softkey.
1 to 11, 20, 33
Measurement
1.0 to 11.0, 20.0, 33.0
Instantaneous
measurement
1.1 to 11.1, 20.1, 33.1
Maximum
1.2 to 11.2, 20.2, 33.2
Minimum
Enter
Max
Min
Inst.
Menu
12, 13
THDS-V
THDS-I
12.0, 13.0
THDS-Vph-n
THDS-I
12.1, 13.1
THDS-Vph-n max
THDS-I max
Enter Max Inst.
Menu
14
Phasor diagram
14.0
Graphic
Phasor diagram
14.1
Table
Phasor diagram
Enter Tab. Graph
Menu
MAN_SICAM_Q100_US.book Page 344 Wednesday, June 5, 2019 9:31 AM