Siemens SICAM Q100 7KG95 Series - Page 351

10 Operation at Use of the Display
10.4 Parameterization
351SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
Submenu Display Number 80.4: Load Profile
Figure 10-22 Submenu Display Number 80.4, Load Profile
NOTE
If you select the Load profile parameter, this note is displayed first:
Changing these parameters resets the load profile!
To confirm, press the softkey F4 (Ok).
Table 10-4 Load Profile Settings
Parameter Default Setting Setting Range
Subperiod 15 min 1 min to 6 min in 1-min steps, 10 min, 12 min,
15 min, 20 min, 30 min, 60 min
Subperiods 1 1 to 5
Sync.source Interne Uhr None
Protocol
BinIn1 (binary input1)
BinIn2 (binary input 2)
Int. clock
Reactive power Q1 Q1
Qn
Qtot
80.4
Load profile
80.4
Sub period time
Enter
80.4
No. of sub
periods
Edit
+
-
Edit
80.4
Sync.source
Edit


Select parameters acc .
to following table.
Ok
80.4
Reactive power
Edit
Esc
MAN_SICAM_Q100_US.book Page 351 Wednesday, June 5, 2019 9:31 AM