Siemens SICAM Q100 7KG95 Series - 13.2 Indications Signaled by LEDs

13 Failures and LED Indications
13.2 Indications Signaled by LEDs
369SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A6, Edition 06.2019
13.2 Indications Signaled by LEDs
SICAM Q100 automatically monitors the functions of its hardware, software, and firmware components. The
LEDs on the top side of the housing and on the display side (only in devices with display) indicate the current
device status.
Designation of the LEDs on the Top Side of Housing
Figure 13-1 Designation of the LEDs on the Top Side of Housing
Designation of the LEDs on the Display Side
Figure 13-2 Designation of the LEDs on the Display Side
RUN
H1
H2
ERROR
Speed
Link/Activity
RUN
H1
H2
ERROR
MAN_SICAM_Q100_US.book Page 369 Wednesday, June 5, 2019 9:31 AM